S9-125KVA 11KV/0.4KV three phase oil immersed power transformer

1.Certificate:IEC60076,ISO9001,ISO14001,OHSAS18001 2.Apply for IEC,ANSI 3.oil immersed power transformer 4.3 year warran

The three-phase oil-immersed distributing transformer applies new type insulating structure and makes short-circuit resistance strong. The iron core is made up of cold-rolled silicon-steel plate of high-quality. high voltage winding group is made up of high-quality oxygen-free copper liner lines and it adopts multilayered drum type structure. All fasteners have been processed with special treatment to prevent As high-tech product that promoted by the country, the product has many advantages such as high efficiency, low loss, its social benefits are remarkable that it will save much of electricity consumption and operating cost.

1/ basic parameters

Type: S9-M

Rated capacity: 125 KVA

Voltage combination:

6KV/0.4KV ;6.3KV/0.4KV; 6.6KV/0.4KV; 10KV/0.4KV; 10.5KV/0.4KV; 11 KV/ 0.4KV

Tapping ±5% OR ±2*2.5%

Conncc-tiojjosymbol: D/Yn11 OR Yyn0

Load loss: 1.8KW

No-load loss: 0.34 KW

Non-load current: 1.7%

Short-circuit impedance: 4%

Oil weight: 130KG

The total weight: 645 KG

Size long: 1080 mm

Size wide: 770 mm

Size high: 1210 mm

Installation size: 550 * 550 mm

Normal packing standard:1PCS/CTN  12PCS/20’  25PCS/40’

2/ the use of the environment

Device types: outdoor type

Normal environment conditions of use: the elevation not more than 1000 m

Environmental highest temperature + 40°C, minimum-25°C

The special environment conditions of use: elevation of more than 1000 m

Environmental highest temperature + 40°C, minimum-45°C. (when you order details)

Mounting ambicnt: no corrosive gas, no obvious dirt environment

3/ carries out the standard

1. GB1094.1 ~ 2-1996 power transformer

2. GB1094.3, 5-2003 power transformer

3. GB/T6451-2008 oil-immersed three-phases transformer power technical parameters and requirements

4.IEC

4/ performance characteristics

1, S9-M series power transformer core USES the high quality cold-rolled steel coil, USES the high quality anaerobic copper into and beautiful outlook, safety of operation. S9 series S7 series transformer and compared, and the annual average no-load loss is reduced by 10% and the average load loss is reduced by 20% and save energy obviously, widely used in industry and agriculture, urban and rural power grid.

2. High reliability, performance level advanced, economical index is reasonable.

3. The core of the level 3 juncture when, surface coating cured paint, in order to reduce loss and noise.

4. Winding new structure, reasonable design oil way, adopt new insulation structure, improve mechanical strength and resistance to short

S9-125KVA 11KV/0.4KV three phase oil immersed power transformer